photo album maker software downloadplanmaker android downloadrock manager download gratisprevx 3 0 license key download
font-face font-family: Pictos; src: ; src: local
Main characteristics of OS/2 Operating System 2 are primarily be simple and powerful gui WPS Workplace Shell, stability and technology lead in the years of OS/2. The graphical user interface is built up completely object-oriented. OS/2 of IBM doesn't have to be in comparison with DOS or Windows extensions any further since the version 2.0. This latest version corresponded to a different operating system generation, containing the potential to utilize the full performance of any 32-bit CPU, developed only by IBM. Up to version 1.3 IBM had cooperated in development with Microsoft. The beta version was tested by 30, 000 voluntary. It was made within the slogan to develop a Better DOS than DOS with success. Much programs for DOS and Windows 3.x, Win32s are executed faster under OS/2 compared with the original operating environment.
The project Odin provides the destination to carry out Win32 programs Windows 9.x and Windows NT in OS/2 Warp natively. This happens by conversion of files to the OS/2 format or about adjustment on the programcode copy inside the memory as inside case of OS/2 programs. Said more exactly, the PE Portable Executable Win32 binary format get converted to the OS/2 LX binarily linear eXecutable format.
A special project is the os eComStation created by Serenty Systems. The last version from the OS/2 computer was modified, enhanced and taken to your newest technical level, the gui also was improved.
OS/2 Warp 4 was already released by IBM in 1996. Because from the long-lasting support by IBM this operating-system is holded up-to-date through service releases and newer hardware drivers to utilize OS/2 on current desktops. Until May 2001 the service release 15 plus the Device Driver Pack 2 0 have the freedom of charge. With this update the device version 4.0 rev. 9.023 was upgraded to version 4.5 rev. 14.096 cW4. After this release IBM grants newer updates only in context on the software subscription with costs. Furthermore cost-free are additions and driver software to guide new fixed disk controllers in addition to ATAPI devices. Indispensable are definitely the driver software of Daniela Engert 1 which completely replace the IBM standard driver software. With this new drivers large FAT 32 partitions are accessable without problems and also the drives operates now inside DMA mode instead with the much slower PIO mode.
The original installation media is made up of one boot as well as installation floppy disks, one operating-system CD-ROM with bonus pack, one application sampler CD-ROM then one driver software CD for older hardware like ISA boards. However, you will require only the boot disk, the os CD-ROM plus more current installation floppy disks 2 for booting on current PCs.
By the updates you still have year 2000 support, new hardware devices, support for big fixed disks around 502 GByte from the 48-components of LBA addressing before for the most part 4.3 or 8.4 GByte, memory in excess of 1 GByte rather than only 64 MByte, USB devices, faster graphics display and SMP support. FAT 16 partitions are tied to a maximum dimensions of 2.1 GByte, HPFS partitions are recognized approximately a dimensions of 64 GByte. It is recommended to upgrade to your newer Kernel like from 11/2003 3 plus the MTRR management 4 backed up by Intel P6/AMD K7. With the IFS there might be added the driver to aid FAT 32 and ext2fs support. To use sound cards from Creative Labs you will find there's ported Open source driver 6, support for current graphics boards comes while using Display Doctor 7.07 from the IBM special 7 of SciTech. This is often a lite version from the entire driver software licensed for IBM to deliver it to any or all OS/2 users totally free. If the correct driver software for your available graphics board isnt contained,
only a broad driver software programs are used with only slowest standard functions to deliver the highest compatibility for many unknown graphics boards. But in case you dont use OS/2 as platform to experiment with games you simply won't be able to state any performance deficits. Otherwise the always current full version of SciTech remains indispensable.
The access to the internet was established having a standard 56K modem with standard AT instructions. The contained Web browser should be to old for modern use with the web and must be replaced by an alternative and much more current browser. Otherwise many sites are not displayed correct. If the file size is not important you can download the Mozilla approx. 14 MByte or Opera browser approx. 5 MByte for OS/2.
To play sound files the PM123 player and MMAudio pack offers its services for media access. The audio format MP3 is supported directly, support for OGG Vorbis and FLAC is usually available as Plugin. Video files within the AVI and MPEG format are played best while using Warpmedia player. This also offers DivX support but only for that expired DivX format in version 3.11. Maybe it exists a codec which makes it also possible to look at current DivX videos.
With the Odin project there's a Win32 emulator that makes the use of Windows programs under OS/2 possible through various ways. Comparably with Wine under Linux, simply a fraction coming from all applications for Windows are supported.
OS/2 Warp release 4.0 rev. 9.023, original version 1994
OS/2 Warp release 4.5 rev. 14.096cW4, incl. updates around 2003
complete utilizable, DMA mode
approximately 1600x1200 with 16 Mio. colours
With the use on the newer setup floppy disks as i have said large harddisks are utilizably plus the desired partition could be selected with the installation. This have to be selected to begin with partition C and marked as installation destination. If you dont be mindful about this, data loss from the just active partition might be happen. OS/2 Warp 4 is established in this particular example because the 3rd primary partition with 2.0 GB of size. The booting manager is installed only with this one. As filesystem it is best to certainly choose HPFS to generate long file names possible and steer clear of installation aborts by to short file names.
0 Hobbes large OS/2 archive, the service and device Driver pack must be downloaded from here ever since the installation process was simplified
1 Daniela Engert: EIDE driver from 11/2001, ATAPI driver from 01/2004, chipset driver from 03/2004 may be obtained at Hobbes OS/2 archive; FAT-32 support from
3 OS/2 Warp Kernel from 11/2003,
4 P6K7MTRR ver.0.08a from 06/2002,
6 SoundBlaster Live! OS/2 Audio driver version 0.81,
7 Graphic driver SciTech SNAP Graphics for OS/2, from Hobbes OS/2 archive or as trial version from
Serenity Systems licensed OS/2 after 2000 and distribute the main system under the product name eComStation.
IBM has released in March 2005 good news to guarantee the payed support of OS/2 for registered customers until 12-31-2006 plus the ending from the sale of OS/2 products on 12-23-05. After this dates no further support of OS/2 is planned. The number of OS/2 installations was estimated to 500, 000 in 2004.
A few small firms, customers
OS/2 1.3, Desktop Manager and Task List
OS/2 1.3, Display from the version and Command Interpreter
OS/2 1.3, Shutdown of the os
OS/2 1.3, Message to show off the computer
OS/2 2.1, Note for your upgrade of OS/2 2.0
OS/2 2.1, Introduction on the installation
OS/2 2.1, Formatting set up . partition
OS/2 2.1, Select the file system FAT or HPFS
OS/2 2.1, Transferring files
OS/2 2.1, System configuration
OS/2 2.1, OS/2 setup and installation
OS/2 2.1, Transferring files
OS/2 2.1, Configure Win-OS/2 desktop
OS/2 2.1, Operating System/2 Boot screen
OS/2 2.1, View in the desktop
OS/2 2.1, Icons of installed programs
OS/2 2.1, DOS window, Tree take a look at drive C:
OS/2 2.1, Message to show off the computer
OS/2 Warp 3.0, WPS with Kick start bar
Warp 3.0, Work Place Shell WPS
Warp 3.0, Desktop settings
Warp 3.0, OS/2 System configuration
Warp 3.0, harddisk device options
Warp 3.0, optional possibly to pick HPFS or FAT16 like a file system of the partition
OS/2 Warp 4.5 - Software administration
Warp 4.5 - with activated DMA and FAT32 driver
Warp 4.5 - Displays the machine resources, hardware and command line
Warp 4.5 - opened program/directory menu
Warp 4.5 - File manager and harddisk drive overview
Warp 4.5 - AudioPlayer plays MP3 files
Warp 4.5 - with Odin, Windows 32 items of applications could be used under OS/2 WinRAR, IrfanView
Warp 4.5 - Connection while using Internet, IBM WebExplorer
Warp 4.5 - Tutorial program about OS/2 Warp
1988 - OS/2 1.1 16-Bit, with graphical program Presentation Manager PM
1989 - OS/2 1.2 16-bit for that first time HPFS in, improved Presentation manager
1992 March - OS/2 2.0 new design, optimized Presentation Manager, protected memory area, as much as 240 simultaneous DOS Sessions possible, 32-bit, high compatibility to OS/2 1.x applications, DOS 2.x - 5.x, Windows 2.x - 3.x, Cut and Paste, new Workplace Shell WPS, supports LAN Server 2.0, extended Services 2.0
1994 Jan. - OS/2 2.1 Graphic subsystem optimized, dual DOS-sessions, APM and PCMCIA support
1994 Oct. - OS/2 Warp 3.0 networkable, P2P
1996 - OS/2 Warp Server Combination of Warp 3.0 aIBMs LAN Server 4.0, server services, remote login
1996 Oct. - OS/2 Warp 4.0 merlin Integration in the pentium III instructions, improved Plug and Play and multimedia, includes Java and VoiceType technology, universally network client
1999 - OS/2 Warp 4.5, bootable cd-rom, new 32-bit TCP/IP stack, JFS
2000 - Version 4.51 version that's completely improved and revised of version 4, Convenience Pak 1
2002 - Version 4.52, Convenience Pak 2, new functions and bug fixes
1999 - Warp Server 4.5 Aurora for e-Business, Netfinity Manager, Java 1.1.6 JDK, new 32-bit kernel, SMP for nearly 64 CPUs, JFS 64 bit Journaling File System, optimized TCP/IP protocol
Copyright c 2009 All rights reserved.
All trademarks acknowledged.
Main characteristics of OS/2 Operating System 2 are primarily the straightforward and powerful graphical user interface WPS Workplace Shell, stability and technology lead in the years of OS/2. The graphical user interface is built up completely object-oriented. OS/2 of IBM doesn't need to be compared to DOS or Windows extensions any longer since the version 2.0. This latest version corresponded to an alternative operating system generation, which includes the potential to make use of the full performance of an 32-bit CPU, developed only by IBM. Up to version 1. 3 IBM had cooperated in development with Microsoft. The beta version was tested by 30, 000 voluntary. It was made underneath the slogan to make a Better DOS than DOS with success. Much programs for DOS and Windows 3.x, Win32s are executed faster under OS/2 when compared to the original operating environment.
The project Odin gets the destination to try and do Win32 programs Windows 9.x and Windows NT in OS/2 Warp natively. This happens by conversion of files in to the OS/2 format or about adjustment on the programcode copy within the memory as from the case of OS/2 programs. Said more exactly, the PE Portable Executable Win32 binary format get converted in to the OS/2 LX binarily linear eXecutable format.
A special project is the computer eComStation put together by Serenty Systems. The last version on the OS/2 os was modified, enhanced and taken to your newest technical level, the program also was improved.
OS/2 Warp 4 was launched by IBM in 1996. Because in the long-lasting support by IBM this os is holded updated through service releases and newer hardware drivers to work with OS/2 on current personal computers. Until May 2001 the service release 15 and also the Device Driver Pack 2 0 cost nothing of charge. With this update the computer version 4.0 rev. 9.023 was upgraded to version 4.5 rev. 14.096 cW4. After this release IBM grants newer updates only in context from the software subscription with costs. Furthermore totally free are additions and driver software to back up new fixed disk controllers and also ATAPI devices. Indispensable are definitely the driver software of Daniela Engert 1 which completely replace the IBM standard driver software. With this new drivers large FAT 32 partitions are accessable without problems plus the drives operates now inside DMA mode instead from the much slower PIO mode.
The original installation media contains one boot and 2 installation floppy disks, one computer CD-ROM with bonus pack, one application sampler CD-ROM and another driver software CD for older hardware like ISA boards. However, you will want only the boot disk, the main system CD-ROM and even more current installation floppy disks 2 for booting on current PCs.
By the updates you have got year 2000 support, new hardware devices, support for giant fixed disks nearly 502 GByte through the 48-pieces of LBA addressing before for the most part 4. 3 or 8.4 GByte, memory of greater than 1 GByte rather than only 64 MByte, USB devices, faster graphics display and SMP support. FAT 16 partitions are restricted to a maximum height and width of 2.1 GByte, HPFS partitions are recognized as much as a size 64 GByte. It is recommended to upgrade into a newer Kernel like from 11/2003 3 along with the MTRR management 4 based on Intel P6/AMD K7. With the IFS there are added the driver to aid FAT 32 and ext2fs support. To use sound cards from Creative Labs there's a ported Open source driver 6, support for current graphics boards comes while using Display Doctor 7.07 inside the IBM exclusive edition 7 of SciTech. This is really a lite version from the complete driver software licensed for IBM to supply it to all or any OS/2 users free of charge. If the correct driver software for your available graphics board isnt contained,
only an overall driver software programs are used with only slowest standard functions to produce the highest compatibility for everyone unknown graphics boards. But in case you dont use OS/2 as platform to experiment with games you do not be able to state any performance deficits. Otherwise the always current full version of SciTech remains indispensable.
The internet connection was established having a standard 56K modem with standard AT instructions. The contained Web browser would be to old for modern use on the web and must be replaced by an alternative plus much more current browser. Otherwise some websites are not displayed correct. If the file size is not important you can download the Mozilla approx. 14 MByte or Opera browser approx. 5 MByte for OS/2.
To play sound files the PM123 player and MMAudio pack offers its services for media access. The audio format MP3 is supported directly, support for OGG Vorbis and FLAC is additionally available as Plugin. Video files from the AVI and MPEG format are played best while using Warpmedia player. This also offers DivX support but only with the expired DivX format in version 3.11. Maybe it exists a codec which make it also possible to look at current DivX videos.
With the Odin project there is a Win32 emulator helping to make the use of Windows programs under OS/2 possible through different methods. Comparably with Wine under Linux, a fraction of the applications for Windows are supported.
OS/2 Warp release 4.0 rev. 9.023, original version 1994
OS/2 Warp release 4.5 rev. 14.096cW4, incl. updates approximately 2003
complete utilizable, DMA mode
nearly 1600x1200 with 16 Mio. colours
With the use on the newer setup floppy disks as stated large harddisks are utilizably plus the desired partition is usually selected for your installation. This have to be selected to begin with partition C and marked as installation destination. If you dont be cautious about this, data loss within the just active partition might be happen. OS/2 Warp 4 is established with this example because the 3rd primary partition with 2.0 GB of size. The booting manager is installed only on this one. As filesystem you ought to certainly choose HPFS to create long file names possible and get away from installation aborts by to short file names.
0 Hobbes large OS/2 archive, the service and device Driver pack needs to be downloaded from here because the installation process was simplified
1 Daniela Engert: EIDE driver from 11/2001, ATAPI driver from 01/2004, chipset driver from 03/2004 is usually obtained at Hobbes OS/2 archive; FAT-32 support from
4 P6K7MTRR ver.0.08a from 06/2002,
6 SoundBlaster Live! OS/2 Audio driver version 0.81,
7 Graphic driver SciTech SNAP Graphics for OS/2, from Hobbes OS/2 archive or as trial version from
Serenity Systems licensed OS/2 at the conclusion of 2000 and distribute the computer under the product name eComStation.
IBM has released in March 2005 what is the news to guarantee the payed support of OS/2 for registered customers until 12-31-2006 along with the ending in the sale of OS/2 products on 12-23-05. After this dates no further support of OS/2 is planned. The number of OS/2 installations was estimated to 500, 000 in 2004.
A few small firms, customers
OS/2 1. 3, Display with the version and Command Interpreter
OS/2 1. 3, Shutdown of the main system
OS/2 2.1, Introduction towards the installation
OS/2 2.1, Formatting cellular phone partition
OS/2 2.1, Select the file system FAT or HPFS
OS/2 2.1, Transferring files
OS/2 2.1, System configuration
OS/2 2.1, Transferring files
OS/2 2.1, Operating System/2 Boot screen
OS/2 2.1, Icons of installed programs
OS/2 2.1, DOS window, Tree take a look at drive C:
OS/2 2.1, Message to make off the computer
Warp 3.0, optional possibly to settle on HPFS or FAT16 as being a file system of an partition
OS/2 Warp 4.5 - Software administration
Warp 4.5 - with activated DMA and FAT32 driver
Warp 4.5 - Displays it resources, hardware and command line
Warp 4.5 - opened program/directory menu
Warp 4.5 - File manager and harddisk drive overview
Warp 4.5 - AudioPlayer plays MP3 files
Warp 4.5 - with Odin, Windows 32 pieces of applications could be used under OS/2 WinRAR, IrfanView
Warp 4.5 - Connection with all the Internet, IBM WebExplorer
Warp 4.5 - Tutorial program about OS/2 Warp
1988 - OS/2 1.1 16-Bit, with graphical interface Presentation Manager PM
1989 - OS/2 1.2 16-bit to the first time HPFS in, improved Presentation manager
1992 March - OS/2 2.0 new design, optimized Presentation Manager, protected memory area, nearly 240 simultaneous DOS Sessions possible, 32-bit, high compatibility to OS/2 1.x applications, DOS 2.x - 5.x, Windows 2.x - 3.x, Cut and Paste, new Workplace Shell WPS, supports LAN Server 2.0, extended Services 2.0
1994 Jan. - OS/2 2.1 Graphic subsystem optimized, dual DOS-sessions, APM and PCMCIA support
1996 - OS/2 Warp Server Combination of Warp 3.0 aIBMs LAN Server 4.0, server services, remote login
1996 Oct. - OS/2 Warp 4.0 merlin Integration in the pentium III instructions, improved Plug and Play and multimedia, includes Java and VoiceType technology, universally network client
1999 - OS/2 Warp 4.5, bootable cd-rom, new 32-bit TCP/IP stack, JFS
2000 - Version 4.51 version which can be completely improved and revised of version 4, Convenience Pak 1
2002 - Version 4.52, Convenience Pak 2, new functions and bug fixes
1999 - Warp Server 4.5 Aurora for e-Business, Netfinity Manager, Java 1.1.6 JDK, new 32-bit kernel, SMP for around 64 CPUs, JFS 64 bit Journaling File System, optimized TCP/IP protocol
Copyright c 2009 All rights reserved.
All trademarks acknowledged.
The AIX os OS is undoubtedly an open standards-based, UNIX main system that allows one to run the applications you wish, about the hardware you desire IBM UNIX OS-based servers. More plus more businesses are selecting the AIX computer OS running on IBM Power Systems. AIX exploits decades of IBM technology innovation which is designed to produce the highest amount of performance, security and longevity of any UNIX os.
The IBM strategic UNIX os for mission-critical, core business applications
Is your platform secure? Really?
Next generation applications for big data and analytics and cognitive computing will offer unprecedented insights into opportunities, threats and efficiencies. IBM Power Systems is a the forefront of delivering ways of gain faster insights from analyzing both structured information and unstructured big data. With the secure, flexible and open platform of IBM Power Systems plus solutions and software, organizations can outpace their competitors by delivering faster services, providing differentiated offerings and turning operational cost into investment opportunity.
Next generation applications for big data and analytics and cognitive computing will offer unprecedented insights into opportunities, threats and efficiencies. IBM Power Systems is a the forefront of delivering approaches to gain faster insights from analyzing both structured information and unstructured big data. With the secure, flexible and open platform of IBM Power Systems plus solutions and software, organizations can outpace their competitors by delivering faster services, providing differentiated offerings and turning operational cost into investment opportunity.
To draw insights making better decisions, businesses rely for the secure, flexible and open platform of IBM Power Systems. Built together with the first processor suitable for big data workloads, the appearance of Power Systems combines the computing power, memory bandwidth and I/O with techniques that are simpler to consume and manage, building on strong resiliency, availability and security.
To draw insights and earn better decisions, businesses rely around the secure, flexible and open platform of IBM Power Systems. Built using the first processor suitable for big data workloads, the perception of Power Systems combines the computing power, memory bandwidth and I/O in manners that are better to consume and manage, building on strong resiliency, availability and security.
IBM Power Systems deliver flexibility and number of operating systems make it possible for your business to aid the next generation applications for big data and analytics and cognitive computing that happen to be transforming how organizations work today. Whether running 1, 2, or all 3 - along with PowerVM, they maximize the advantage of Power Systems in your company.
IBM Power Systems deliver flexibility and collection of operating systems to permit your business to compliment the next generation applications for big data and analytics and cognitive computing which are transforming how organizations work today. Whether running 1, 2, or all 3 - as well as PowerVM, they maximize the advantage of Power Systems in your small business.
Transform your small business with Systems Software that permits virtualization, high availability, flexibility, security and compliance on Power Systems. IBMs integrated strategy to developing Systems and Systems Software together delivers optimized results with Power Systems.
Transform your organization with Systems Software which allows virtualization, high availability, flexibility, security and compliance on Power Systems. IBMs integrated way of developing Systems and Systems Software together delivers optimized results with Power Systems.
As a receptive innovation platform, Power Systems is optimized for big data and analytics performance and also to deliver scale-out economics and security for your cloud. IBM and IBM Business Partner solutions exploit key capabilities in IBM Power Systems.
As a wide open innovation platform, Power Systems is optimized for big data and analytics performance also to deliver scale-out economics and security to the cloud. IBM and IBM Business Partner solutions exploit key capabilities in IBM Power Systems.
Over the final five years a large number of clients have migrated to IBM Power Systems for choice and suppleness. Learn how Power Systems has helped them revolutionise the way IT is developed and delivered, optimise for big data and analytics, and support private, public and hybrid offerings for scale-out or scale-up implementations all while improving business performance, reducing risk, and establishing a platform for growth.
Over the very last five years a large number of clients have migrated to IBM Power Systems for choice and suppleness. Learn how Power Systems has helped them revolutionise the way IT is developed and delivered, optimise for big data and analytics, and support private, public and hybrid offerings for scale-out or scale-up implementations all while improving business performance, reducing risk, and establishing a platform for growth.
Missed Edge2015? You can still see the videos and presentations.
AIXchange of tips, ideas, and information
The AIX main system OS can be an open standards-based, UNIX main system that allows one to run the applications you desire, for the hardware you desire IBM UNIX OS-based servers. More plus much more businesses are picking out the AIX main system OS running on IBM Power Systems. AIX exploits decades of IBM technology innovation and it is designed to deliver the highest a higher level performance, security and toughness for any UNIX main system.
The IBM strategic UNIX computer for mission-critical, core business applications
Is your platform secure? Really?
Next generation applications for big data and analytics and cognitive computing will offer unprecedented insights into opportunities, threats and efficiencies. IBM Power Systems reaches the forefront of delivering answers to gain faster insights from analyzing both structured information and unstructured big data. With the secure, flexible and open platform of IBM Power Systems plus solutions and software, organizations can outpace their competitors by delivering faster services, providing differentiated offerings and turning operational cost into investment opportunity.
Next generation applications for big data and analytics and cognitive computing will offer unprecedented insights into opportunities, threats and efficiencies. IBM Power Systems is in the forefront of delivering ways of gain faster insights from analyzing both structured information and unstructured big data. With the secure, flexible and open platform of IBM Power Systems plus solutions and software, organizations can outpace their competitors by delivering faster services, providing differentiated offerings and turning operational cost into investment opportunity.
To draw insights and earn better decisions, businesses rely for the secure, flexible and open platform of IBM Power Systems. Built together with the first processor suitable for big data workloads, design for Power Systems combines the computing power, memory bandwidth and I/O in many ways that are quicker to consume and manage, building on strong resiliency, availability and security.
To draw insights and earn better decisions, businesses rely about the secure, flexible and open platform of IBM Power Systems. Built with all the first processor made for big data workloads, the style of Power Systems combines the computing power, memory bandwidth and I/O in manners that are simpler to consume and manage, building on strong resiliency, availability and security.
IBM Power Systems deliver flexibility and selection of operating systems to permit your business to aid the next generation applications for big data and analytics and cognitive computing which might be transforming how organizations work today. Whether running 1, 2, or all 3 - along with PowerVM, they maximize the benefit from Power Systems in your organization.
IBM Power Systems deliver flexibility and range of operating systems to allow your business to compliment the next generation applications for big data and analytics and cognitive computing which might be transforming how organizations work today. Whether running 1, 2, or all 3 - in conjunction with PowerVM, they maximize the benefit for Power Systems in your organization.
Transform your company with Systems Software that permits virtualization, high availability, flexibility, security and compliance on Power Systems. IBMs integrated strategy to developing Systems and Systems Software together delivers optimized results with Power Systems.
Transform your online business with Systems Software that permits virtualization, high availability, flexibility, security and compliance on Power Systems. IBMs integrated method of developing Systems and Systems Software together delivers optimized results with Power Systems.
As a receptive innovation platform, Power Systems is optimized for big data and analytics performance as well as deliver scale-out economics and security to the cloud. IBM and IBM Business Partner solutions exploit key capabilities in IBM Power Systems.
As a wide open innovation platform, Power Systems is optimized for big data and analytics performance and also to deliver scale-out economics and security to the cloud. IBM and IBM Business Partner solutions exploit key capabilities in IBM Power Systems.
Over the very last five years countless clients have migrated to IBM Power Systems for choice and adaptability. Learn how Power Systems has helped them revolutionise the way IT is developed and delivered, optimise for big data and analytics, and support private, public and hybrid offerings for scale-out or scale-up implementations all while improving business performance, reducing risk, and establishing a platform for growth.
Over the very last five years a large number of clients have migrated to IBM Power Systems for choice and adaptability. Learn how Power Systems has helped them revolutionise the way IT is developed and delivered, optimise for big data and analytics, and support private, public and hybrid offerings for scale-out or scale-up implementations all while improving business performance, reducing risk, and establishing a platform for growth.
Missed Edge2015? You can still comprehend the videos and presentations.
AIXchange of tips, ideas, and information
How to produce a full open source platform for gaming and internet browsing beyond OS/2 Warp 4.
Having applied the appropriate updates and service packs most software written or compiled for that eComstation will likely run on OS/2 Warp.
HTTP/1.1 302 Moved Temporarily Server: nginx/1.8.0 Date: Tue, 15 Dec 2015 23:24:46 GMT Content-Type: text/html Transfer-Encoding: chunked Connection: keep-alive X-Powered-By: PHP/5.4.45-0deb7u2 Location: /library
We are happy to get able to produce you with free usage of one with the largest collections of abandonware and pre-release software online. For redundancy and speed, we provide usage of both our entire collection around the primary library mirrors together with smaller, more specific mirrors.
Disclaimer: Please note that most our downloads are provided cost-free, and are avalable with no guarantees or warranties of any type. While we is going to do our best to help you when possible for the forums, we simply cannot be held accountable for any difficulties you might encounter like a result of applying this site or even the software contained herein.
All software in your collection is archived inside 7-Zip format using 7-Zip 9 for optimal compression. 7-Zip is really a free, open-source archival utility, and now we recommend with it for extracting any files downloaded from the software library. The files enclosed will likely be of varying formats which you'll be able to read more about on our Archive Information page.
If you do have a software package or version not found within our download library we're going to likely would like your contribution! We welcome contributions from any subscribed part of WinBoards and accept them in keeping file formats per our requirements. You can read what's needed for CD DVD images along with for floppy disk images. You may enclose multiple files within any reasonable compression format as our staff will re-package them for WinWorld distribution.
through the past, for the present, to the future.
You desire to access files, printers as well as COM ports on other machines, however are using Warp 3 non-Connect, OS/2 1.2, 1. 3 or Does that mean you are away from luck? Fortunately, no. Believe it or otherwise, but Microsoft has some free OS/2 software for you personally on their FTP site: its referred to as LAN Manager Client for OS/2. Read about it below. OK, so you have some of those older versions of OS/2 : Warp 3 however, not Warp 3 Connect OS/2 1.2, 1. 3 or 2.x. You use a network card and you might be connected to your network. What you desire to do should be to access resources mainly files and printers found on another machine. These older versions of OS/2 come without networking software. You dont wish to upgrade yet or buy extra software. Does this mean you are outside of luck? Nope. Believe it you aren't, but Microsoft has some networking software for you as well as the good news is that it cost nothing. The software packages are called the Microsoft LAN Manager Client for OS/2 also known as LanMan from the following. LanMan can be a client that permits you to hook up to SMB/NetBIOS servers for instance Windows NT, Windows 95, Windows for Workgroups, Warp 4/Connect, Warp Server etc. etc. Read this for a few background information for this. Please remember that LanMan is not used to own TCP/IP applications. Actually, it lets you do contain a TCP/IP stack however, you just cannot use it for those the mainstream OS/2 TCP/IP applications. Too bad, but read below how you will might be able to utilize FreeTCP with LanMan.
Can you utilize LanMan to get into Samba servers? Yes, it is going to work there is however one little problem. LanMan cannot start to see the names from the available Samba servers in your network but once you already know the name from the Samba server, it is going to connect fine. Theres now a fix available: you or perhaps your friendly system administrator:- probably will wish to install the LM Announce patch within the Samba server. Click here to the details. For other tips about using LanMan to reach Samba servers, simply click here.
Do not, repeat DO NOT install LanMan in case you have Warp Connect, Warp 4 or LAN/Warp Server! The networking software added to these versions of OS/2 are a lot easier better than LanMan! And if you will always install LanMan, you could screw up your
Its free. The only real selling point of LanMan. You must pay money for Warp Connect or any later version of Warp or Lantastic not sold anymore. If you have one of such, it's not necessary LanMan.
Its expressed by Microsoft. Thats a major disadvantage because Microsoft includes a strong distaste for OS/2, a competing product. Dont expect any updates or bugfixes to the OS/2 Client. Microsoft carries a bad track record of writing buggy software systems work efficiently expect some quirks the MS2000 and problems. However, I must say I havent experienced any serious problems, apart from a bug where an incorrect was written when I removed a protocol. The interface is outdated. It has no nice graphical program such as Warp 4s and even Windows for Workgroups. However, it can its job and it will it well and thats what counts.
Both NetBIOS over NetBEUI and NetBIOS over TCP/IP are supported. Click here for learn more. In a nutshell, SMB/NetBIOS could be the protocol to blame for accessing remote resources.
Its TCP/IP stack is incompatible. LanMan posesses a TCP/IP stack but this stack is incompatible effortlessly those nice OS/2 TCP/IP applications. It is merely there to hold the NetBIOS protocol above the TCP/IP protocol. This means you cannot utilize this stack for OS/2 TCP/IP applications. The only useful TCP/IP application added to LanMans stack is PING. You need NetBIOS over TCP/IP called TCPBEUI or RFC/NetBIOS as long as you need to get into a server that may be located across an IP based router. Or in the event the server runs Samba, because Samba only supports NetBIOS over TCP/IP.
Its TCP/IP stack won't support the BOOTP protocol. This means you must specify the IP address, netmask, gateway etc. manually rather than getting them in the net coming from a BOOTP server. DHCP and WINS arent supported either.
Supports redirection of various resources. These resources could be disk drives, parallel ports printers and serial ports modems. This is known as redirection ever since the input/output of the device are redirected in the network into a fake device on the client machine. The redirection of serial ports is rather unique. With the OS/2 LAN Manager Client you may access a modem attached to some Warp 4 or Warp Connect machine. With one limitation: the redirected serial ports are around to OS/2 programs, however, not in DOS/Windows sessions under OS/2. Other commercial modem share servers do exist including SpartaCom and I believe the LAN Manager Client, Warp 4 and Warp Connect are suitable for these.
It is just a client. That means you'll be able to use other bands resources hard drives, printers, etc. nevertheless they cannot use yours. You can send messages while using
command though. Microsoft wants someone to connect to an NT server with LanMan, thats why it can be a client and free.
You cannot initiate appreciable link make a fresh drive letter to some network drive from an DOS or Windows session. You must increase the risk for connection with all the LAN Manager text interface the
command in an OS/2 command prompt. The redirected drive letter will be available if you switch to your DOS or Windows session. Seems simply a minor limitation for me.
For simplicity, I assume from the following that your boot partition is C: and you happen to be installing LanMan in Change that when your situation takes a different approach. Configuring LanMan isnt extremely tough, providing you have the information you'll want to fill in: the right name for ones machine, your username, the domain youre on if you want to work with NetBIOS over TCP/IP your IP address, netmask and perhaps the IP address of the gateway. Please understand this information right this moment or otherwise you'll receive stuck afterwards.
In short, heres what youll have to complete:
Some security measures.
Get an NDIS driver to your network card.
and configuring the Client.
Configure the interrupt, DMA, I/O address etc. to your network card in
Reboot monitor error messages during startup.
A suggestion: in case you print these instructions on paper you've got a much better overview.
Some health concerns.
If youve tried installing LanMan already, and failed, take away the aborted installation completely before proceeding. That is, edit your and eliminate the two lines
and everything with shod and non-shod. Remove all references to your LAN Manager directory from the paths. Also, delete completely or just take away the LanMan lines from that. Then reboot and delete the LAN Manager directory.
Before you continue, please generate a safety backup of one's OS/2 An error inside should not keep it from booting. In most cases, you will have the capacity to press Enter so the boot process continues. However, its better for being safe than sorry. So, should you not manage to boot normally, you may restore the backup copy of your respective You do this by pressing AltF1 if your small white block appears on the upper left corner with the screen, right before the OS/2 logo appears. Then you obtain the Recovery Choices screen. Press C to venture to an OS/2 command line. Now it is possible to COPY the backup above the current.
You will get this zipfile on It posesses a couple of drivers for many popular network cards, plus other files you could need down the road. These include some example configuration files.
Get an NDIS driver for ones network card.
An NDIS driver can be a piece of software which supplies a standard interface to network cards. This means that makers of networking software can write for the NDIS standard and don't have to worry about every network card.
Youll need an OS/2 NDIS driver on your network card. You can use one which was given your card when you are lucky. You can recognize the motive force by its 2 extension. In most cases, it can be located inside the directory
For your convenience, I include drivers for that 2 most widely used network cards in
These will be the NE2000-compatibles as well as the 3Com EtherLink III. Should you want the total set of drivers of those cards look here and here, respectively. Especially NE2000 clones are inexpensive and also common among home users, students, etc. Vendor supplied OS/2 drivers for NE2000 clones tend to be buggy and/or slow. Since many folk have reported success with the trucker included on this distribution, I recommend by using this one instead. You wont must waste time experiencing your own driver and searching for a better one. You will find both drivers inside directory
Before you install LanMan, please look at the licence agreement added with it: see It isnt an awful idea to flick through these installation instructions a tad. Not things are all interesting the bits regarding the DOS clients arent however, if you are certainly not familiar with network clients on the whole you might wish to have a look. I have tried to create the instructions below as self-contained as you can, they needs to be sufficient.
Get the Microsoft LAN Manager 2.2c Client for OS/2 by downloading all files in 2/. Note that although the version is 2.2c, it is possible to see version 2.2a mentioned here and there inside documentation along with the
You can install from floppies or from hard drive. If you choose to install from floppies, get 4 blank disks and extract each with the 4 archive files to some disk. Installing from hard drive is much faster. Disk 4 contains many small files that makes the disk drive grind consistently. Create a temporary directory within the hard disk and extract each on the 4 archive files fot it directory. The archive files possess a couple of duplicate files so once you get a message which the file already exists, just say yes. Or no. Doesnt matter.
etc. Dont forget to specify the
parameter when you execute them directly because otherwise the files will probably be extracted without their paths.
Theres a problem together with the LAN Manager Client. Deliberately or you cannot, Microsoft ensured that LanMan doesnt stress on OS/2 versions later than 2.0. The problem is often a file called
You need to fool this driver into thinking it's running under OS/2 2.0. Use the following means of that.
inside root directory on the OS/2 boot partition. You achieve that by executing the subsequent command with an OS/2 prompt:
Using an editor, add these lines to
as these are, but if you would like, it is possible to restore them by executing the subsequent command with the OS/2 prompt:
Shutdown and reboot. This is required, so how the change in
Go to your A: drive or temporary directory about the harddisk and execute Follow the instructions for the screen. I wont explain here every single screen you obtain. It is reasonably straightforward. Youll notice how the mouse doesnt work. Press Alt to find the menu. Navigate utilizing the cursor keys through pressing Tab, Return and Esc. You select choices using the spacebar.
In the screen Network Adapter Drivers you recruit a list of drivers incorporated with LanMan. Be warned which the list is extremely limited and how the drivers date from 1994, so they may be quite old. You might want/need to work with a newer driver on the disk furnished with your network card. In that case, utilize the Tab key to visit to Other Driver and press Enter. Specify the directory is important in which you are able to find both the directory. If you've an NE2000-compatible, do NOT select NE2000 driver included together with the Client: it can be buggy. Use the driving force I added to this archive instead. I also included an 3COM Etherlink III driver. So, in case you have an NE2000 or possibly a 3COM Etherlink III, as well as the drivers offered with this archive directory 2 are situated in
select Other Driver and specify the path
If you actually have an OS/2 NDIS driver but there isnt any 2 directory offered with it, you should work around that and much more or less install that driver manually. I think the most beneficial solution would be to decide on any driver through the list just dont select the NE2000 because doing so crashes. Once cellular phone is finished you ought to edit the and take off the line for the driving force you just installed. Insert one for the motive force you actually want make use of and configure the settings correctly in
I wont explain complete how to try and do that, I hope youll think it is isnt very difficult to complete. In the FreeTCP documentation I give one example on the way to edit the
For the English version of WfWg and Win95 it is
in the event you dont get connected to big time servers like NT, LAN Server, Warp Server. LanMan searches of those servers and it is going to timeout faster if you employ
NetBEUI NetBIOS over NetBEUI is one from the supported protocols. You can get NetBIOS over TCP/IP TCPBEUI by checkboxing TCP/IP. If you enable both options, you obtain both NetBIOS over NetBEUI and NetBIOS over TCP/IP. I have not a clue what NetBIOS 3.0 is and what it can be for. I dont customize the other default settings.
After you might have configured LanMan, exit cellular phone program. Do not reboot yet.
You need to configure some settings interrupt, DMA, I/O address etc. for the network card in
There really should be an entry section with the network card from the Such a section could be called NS2000NIF or ELNK3NIF, by way of example.
If your personal OS/2 NDIS driver doesn't have a NIF information declare MS OS/2 LAN Manager you need to do need to manually put in a new section towards the Look on the trucker disk forwarded to your network card or from the zipfile in the event you downloaded the driving force from Internet for a good example file which you'll be able to use like a starting point. Dont copy it in whole within the in C:LANMAN. You only must copy and paste the kind of section which deals using the network card itself.
If you could have an NE2000 clone as an example, youll ought to specifify the Interrupt IRQ along with the I/O base address. Of course, they should agree using the settings of one's network card. In many cases, you determine the IRQ and I/O base with jumpers within the card. Newer cards will not have jumpers with them, you have make use of a DOS configuration program to alter settings.
If you've an EtherLink III however, generally you dont should edit the ELNK3NIF section because this card is self-configuring. It finds the IRQ and I/O base by itself.
The example in your network cards driver disk usually has a description coming from all the keywords it is possible to use for your network cards section. You can customize the settings if it's needed. Since every network card is unique, I cant really tell what to complete, in many cases the default settings should work.
watch any errors you obtain. When the little white OS/2 block occurs in the top left corner, you might wish to press AltF2 so that you may see the drivers being loaded. If one occurs, you immediately see which driver caused it. If you have a SYS1719 on, tchk tchk, you didnt read my instructions on editing the
If you still have this far, dont you sit there waiting! Try it out! Start having a simple case. For instance, when you installed the TCP/IP stack added with LanMan, try using its in a very command window. Ping your gateway machine or perhaps your Domain Name Server DNS by way of example. Also try gain access to resources of any machine towards you. See if NET VIEW works. Etc. etc.
I wont discuss using LAN Manager complete, but follow this advice and loose comments. NET SEND jacco Dinners ready!
without any parameters you find a text window where you are able to perform many of these actions via a menu. The mouse works, in contrast while using installation program.
starts within a full screen session. Personally I dont like this, so I produced patch called
will open within a windowed OS/2 session. If you wish to restore the existing situation, run
WfWgs WinPopup etc. it pops up in a very full screen session. Again I tried to generate a patch but I had no luck.
If you go towards the drives folder you will recognize that a new drive icon will popup after you add a different drive on the network. Nice, huh?
if there's no major server NT, LAN Server etc. within the network. That ought not be a difficulty. Remember that you may use the website name STANDALONE to reduce the wait time.
of course for the PROTMAN section inside determines which protocol is for being tried first should you have both NetBIOS over NetBEUI and NetBIOS over TCP/IP installed.
I found a critical problem when LanMan can be used in combination with 4OS/2 to connect to your Windows for Workgroups machine. Blank spaces fell in directory listings on the WfWg machine and a number of times the OS/2 machine crashed. When I switched back to your standard OS/2 shell the issue went away. In DOS boxes I experienced no such issues with 4DOS used because shell.
Most networking software comes with an option to find out which machines are within the network. This is referred to as browsing. LanMan support browsing, and it is possible to do this while using
comman. However, LanMan itself are not browsed, detected. So, if anyone really wants to send you a network message, he/she has to know your network name or computer name ahead of time. They cannot understand it by browsing the network. Of course its always possible to send out a broadcast
I have gotten some mixed success while browsing the network and detecting other network clients with LanMan. LanMan had some problems finding Windows for Workgroups and Windows 95 machines together with the
command. I know a workaround for Windows 95 machines: it helps in the event you goto Control Panel - Network - File and Print Sharing for Microsoft Networks - Properties and hang up the LM Announce choice to Yes. The backside on this solution is required those Windows 95 machine a lot longer to shutdown then, therefore the users of these machines probably wont like Anyway, once you are doing know the remote sites computer name, you'll be able to browse its resources just fine with all the command
I also found that you have to identify yourself having a valid account before an NT server would prefer to show you its resources. For more information about this, along with similar LM Announce settings for Windows NT and Windows for Workgroups, read Robert Thomas instructions section 3.1.2, Windows Browsing.
Long File Names LFNs, filenames built beyond the ancient DOS 8. 3 name limitation, are another matter. Heres a chart where you'll be able to lookup if LFNs are supported if you connect together with the LanMan into a machine running other networking software.
Only if your shared disk you connect to is really a filesystem which assists LFNs, for example HPFS or Ext2FS. Not on FAT.
These os's can optionally mangle a LFN right into a valid 8. 3 filename to ensure that DOS clients can access these files. Example:
Other clients that support LFNs can easily still access the file by its complete name.
As you are able to read about this webpage, SMB could be the language that each with the products speak, however, many support more dialects than the others. Windows 95 and NT both come using a new dialect another one. that the LAN Manager Client doesnt speak. That must not be a problem given it has older dialects in keeping with Windows 95 and NT. However, Microsoft rolling around in its infinite wisdom decided for Windows 95 to not keep the most advanced of these older dialects, called LANMAN2. NT has this dialect owing to NT Microsoft aims to exchange older LAN Manager and LAN Server machines, which are sometimes used for OS/2 clients. This means, for instance, when a Warp 4 machine creates a connection to your Windows 95 machine, it wont manage to see the long filenames on that machine. While Windows 95 can start to see the long filenames with a Warp 4 or Connect machine. The result? Warp looks bad and gets blamed, whilst in reality Windows 95 will be the culprit!
A HOSTS file is usually a simple number of lines. Each line includes a numerical IP address for the host as well as a alphanumerical hostname this agreement this host may your PC. There can be a file called
inside same directory. This file has the mappings of IP addresses to computer NetBIOS names.
You ought to add an entry for other machines on the HOSTS file if you would like to bypass the DNS. For instance, in case you dont have a very DNS because youre over a simple network in your own home. The same goes up for your LMHOSTS if you have no major server within the network.
Please note: the very last line from the HOSTS and LMHOSTS files ought to end that has a Carriage Return/Line Feed, otherwise that line will stop recognized. And that can result in strange errors that are difficult to trace.
It may be possible, but dont makes use of the TCP/IP protocol included using the Lan Manager Client MSTCP in the event you plan to work with OS/2 TCP/IP applications. Even Microsoft will admit that MSTCP is just for NetBIOS over TCP/IP. The real trick and question come about whenever you decide whether you might be going to make use of IBMs LAPS to back up your network adapter, or use Microsofts NDIS management. Albert Crosby has become using Microsofts, but you may load LanMan along with LAPS in case you prefer he hast complied.
To do that, Ive used these steps:
Install TCP/IP and LAPS using one machine. Get it working. Make sure that you then have a copy of along with TCPIPBIN. Then eliminate the IBMLAN, IBMCOM, and MUGLIB directories, and all sorts of references to them inside Comment out of the run statements for TCP/IP.
Install LanMan for OS/2. Get it working.
Add the lines to varied files had to get TCP/IP working together with LanMan. These are:
Add this to, following a NDIS driver inside LANMAN section:
At this time, everything should work fine.
Ok, so shall we say you want to make use of TCP/IP, and you also wish to connect to machines running Warp 4Warp ConnectWindows for WorkgroupsNTWindows 95 etc. If not, then just skip this part. The easiest solution will be to buy Warp 4. However, in case you dont need to spend money you might install the Microsoft OS/2 LAN Manager Client and FreeTCP. FreeTCP makes it possible make use of the Internet Access Kit contained in Warp s Bonuspak using a network card, and not only a modem. It is actually a subset of LanMan. I used it to bind the TCP/IP stack offered with Warp towards the Ethernet card.
A while back, I mentioned LanMans features. Two of these are generally a bit of your problem:
The TCP/IP stack added to LanMan is incompatible with every one of the OS/2 TCP/IP applications.
The first problem is usually solved: make use of the TCP/IP implementation through the IAK together with TCP/IP bugfix; basically: FreeTCP. It is achievable to run both LanMan to the NetBIOS support and FreeTCP for your TCP/IP support in the same time. See the instructions below Using the LAN Manager Client with FreeTCP for the entire details.
However, it's not possible to operate NetBIOS over TCP/IP if you have FreeTCP and LanMan concurrently. If you wish to run NetBIOS over TCP/IP with LanMan, there isnt any other choice than make use of LanMans TCP/IP implementation. And that means no support for OS/2 TCP/IP applications. You can have both should you get Warp 4.
LanMan is simply a client, but if you wish others to connect with your machine you might need to consider Samba, a freeware server . It continues to be ported from Unix to OS/2 : Samba/2. It supports only NetBIOS over TCP/IP rather than NetBIOS over NetBEUI. LAN Manager s TCP/IP stack is usually not supported. So you need FreeTCP or IBM TCP/IP 2.0 in order to own Samba. With Samba, FreeTCP and LanMan, you'll be able to get TCP/IP and NetBIOS running. The NetBIOS client is NetBIOS over NetBEUI, and also the NetBIOS server is NetBIOS over TCP/IP. That means for instance that if you desire to share drives/printers which has a Windows 95 user on both sides that user must install both NetBIOS and TCP/IP support. Should cease too much of any problem. So far, Samba for OS/2 is really a bit experimental. It works, nevertheless it has not been tested very extensively and you ought to edit an ASCII configuration file. Its not as simple to use as Warp 4.
I accept you that this looks very complicated. Its fun to obtain it all working if you're interested in networking. If not, and youve got the bucks, you may just as well escape the trouble and get Warp 4.
Heres an instant summary on LanMan, if you employ it with one in the two possible TCP/IP implementations stacks:
run NetBIOS run NetBIOS over TCP/IP; run OS/2 TCP/IP apps;
So you might have installed LAN Manager Client to get into other machines running Warp 4Warp ConnectWindows for WorkgroupsNTWindows 95 etc. But now you also would like to run OS/2 TCP/IP programs. Previously, I released instructions how you will could use Warp s Internet Access Kit IAK from your Bonuspak which has a network card, and not simply a modem. I called this FreeTCP playing with fact it turned out based on parts from LanMan and files from an IBM TCP/IP 2.0 bug fix. What now follows is often a similar scheme, except the whole LanMan can be used. In short, heres what youll have to complete:
Install the Internet Access Kit IAK, or even already done.
Install the LAN Manager Client.
Start using TCP/IP apps and get within the net!
If you happen to be setting up this stuff to the first time, I suggest you skip steps 7, 9.11. This allows you to definitely open an OS/2 window and execute
manually. Should something fail then, theres more chance you will note an error message. If you dont get any errors, it is possible to continue together with the steps you skipped.
If you havent completed it already, install the Internet Access Kit generally known as Internet Connection for OS/2 through the BonusPak.
you normally would do and understand it to work. See the normal installation instructions Installation in the LAN Manager Client. Choose NetBEUI support. DO NOT install LanMans TCP/IP support. Thats because we have been going to work with the IAKs TCP/IP support.
The reason I want someone to download FreeTCP is that you could possibly need the documentation
by executing the file directly or by employing Info-Zip:
make use of the section name of your respective network card for the BINDINGS line. In the example above I used a Etherlink III. Just copy the BINDINGS line from your
section. The could consider looking similar for the Etherlink III example
I included. Copy lines in your
where needed. First, add the FreeTCP binaries way to PATH and DPATH, ahead of the rest. You installed LanMan previously, so there must be LanMan lines inside your You can leave them as they can be, with one exception: the line
has to be loaded AFTER all of the other network lines. So move it in the LanMan section towards the last line and earn sure it remains around the last line. Now add the
lines plus the other lines within the example, if there arent there already. For a conclusion of these lines, view the FreeTCP documentation. A difference with FreeTCP is that its not necessary a
line already binds the drivers in your case. Thats why you will need to put it within the last line.
Start using TCP/IP apps and get about the net!
so as to avoid a brand clash.
Ive got a Ethernet adapter which connects for the parallel port. What IRQ and IOBASE do I have to make use of?
As far as I know, these are certainly not needed for parallel network cards.
The computer crashes around the network driver; network performance is extremely poor; etc.
Several folk have reported crashes using vendor supplied old driver. If your driver crashes, TRAPs etc, try and get a later version. I mentioned two FTP sites above where it is possible to find more NDIS drivers. If the vendor is for the Internet, bug them about a fresh driver. If you could have an NE2000-compatible, don NOT utilize NE2000 driver offered with LanMan: it truly is buggy. A good driver has been expressed by National Semiconductors: 2. Ive designed a NIF file that enables you to install this driver from LanMan. Just for laughs, heres an excerpt from an article inside the Microsoft Knowledge Base on their own buggy driver. Needless to say, this article dates from 1994 and they also still havent updated the trucker.
2. We are researching this matter and will post new information
here inside Microsoft Knowledge Base since it becomes available.
If you've got an Etherlink III, or some other network card with hardly any onboard memory, please look at
Windows TCP/IP WinSock programs dont work!
was forwarded to LanMan, so LanMans TCP/IP stack isn't going to support WinSock programs. Nor DOS TCP/IP programs. If you desire DOS and Windows TCP/IP support, you need to utilize the TCP/IP stack forwarded to Warp FreeTCP, Warp Connect etc.
If it will take you more than a few hours or perhaps days then dont hesitate to get hold of me directly. Be sure to make sure your configuration files first. Please mention LanMan for the subject line. Include the kind of files: your and Also mention what network card you've got and what driver you employ.
Thanks to Microsoft for writing and supporting OS/2 software yeah, right! This document is to your large extend depending on Albert Crosby s Mini-FAQ about OS/2 and Windows Networking. It was previously located within the Walnut Creek FTP server but I cant still find it anymore. Anyway, I saved a duplicate here.
It seems to try and do the trick though. This one was on Hobbes
but apparently some old stuff continues to be cleaned up. You can
still think it is with Archie on other sorts of sites.
Tile-matching solitaire mahjongg games and Shisen-Sho games for IBMs OS/2 main system.
Please be aware that I am not an OS/2 user and neither have having access to this OS and that every information and screenshots are taken through the publishers sites and/or other sites who lists OS/2 games. If you ought to find any errors or omissions who Im sure there are lots ; please send me a email.
From OS/2 World : This a nice Mahjongg game that comes offered with Warp 4 Client. It includes several form of mahjongg from the same game, confirm the screen shot. From: PSP Boca Programming Center, published by: Jurg von Konel. Technically it is not freeware. You could say it free with OS/2. And its almost abandonware I mean
7 tilesets its possible to create your own, several layouts and backgrounds, Statistics high score?. Author: Bernd Wetzel. For OS/2 Req.: 2.1 or maybe more, runs about the workplace shell. Shareware US 25 1995, abandonware today. Wrongly named Mah Jongg Dragon on OS/2 World.
Old 1992/1993 game for Windows and OS/2 Req.: Warp 3 with DIVE or later. Nothing to see here, move along
Review depending on Windows version. Made by Syncrosoft. Shareware then 20, abandonware today.
OK game. 13 layouts and 18 tile sets. Re-sizeable. Undo and Hints. High scores. You can design your tile sets bmp-files. Author: Daniel F. Valot. Versions for OS/2 req.: OS/2 Warp 3 with DIVE or later and Windows available. Review depending on Windows version.
Beautiful. 13 tilesets, multiple screen resolutions supported and automatic scaling of tiles, Hall of Fame, undo, redo, hint, peek, restart, pause, use jpg/gif/png-graphics as background, 3 difficulty levels, 6 board size from 14x6 to 30x16, several themes look-and-feel, English and German language. Req.: Java 2 runtime download from Java home. Platform independent operates on OS/2, Linux, Windows, Solaris and Mac OSX. Authors: Uwe and Jьrgen aus dem Moore.
Shisen-Sho clone - looks very beautiful through the pictures. Features: Several stonesets tilesets, multiple screen resolutions supported without scaling from 640x480 nearly 1800x1350 and automatic scaling of stonesets, Hall of Fame, unlimited undo, hint. Authors: Uwe and Jьrgen aus dem Moore UJ
A decent clone. Graphics has been better, though. 18 tile sets including a road sign tile set, 5 board sizes from 14x6 to 30x16. 5 speed levels and 3 difficulty modes. Hint, Demo and High Scores list. Standard mode, Gravity mode tiles slip the board, Fall mode and Attractive mode. Choose bitmaps as backgrounds. Bitmap template with which it is possible to make your own personal tile sets. Versions for OS/2 req.: Warp 3 with DIVE or later and Windows. Review and screen- shot determined by Windows version. Author: Daniel F. Valot
Tile-matching solitaire mahjongg games and Shisen-Sho games for IBMs OS/2 computer.
Please observe that I am not an OS/2 user and neither have use of this OS and that most information and screenshots are taken through the publishers sites and/or other sites who lists OS/2 games. If you need to find any errors or omissions who Im sure there are several ; please check out my website.
From OS/2 World : This a nice Mahjongg game that comes incorporated with Warp 4 Client. It includes several style of mahjongg from the same game, look at the screen shot. From: PSP Boca Programming Center, authored by: Jurg von Konel. Technically it's just not freeware. You could say it free with OS/2. And its almost abandonware I mean
7 tilesets its possible to create your own, several layouts and backgrounds, Statistics high score?. Author: Bernd Wetzel. For OS/2 Req.: 2.1 or better, runs about the workplace shell. Shareware US 25 1995, abandonware today. Wrongly named Mah Jongg Dragon on OS/2 World.
Old 1992/1993 game for Windows and OS/2 Req.: Warp 3 with DIVE or later. Nothing to see here, move along
Review determined by Windows version. Made by Syncrosoft. Shareware then 20, abandonware today.
OK game. 13 layouts and 18 tile sets. Re-sizeable. Undo and Hints. High scores. You can design your own personal tile sets bmp-files. Author: Daniel F. Valot. Versions for OS/2 req.: OS/2 Warp 3 with DIVE or later and Windows available. Review according to Windows version.
Beautiful. 13 tilesets, multiple screen resolutions supported and automatic scaling of tiles, Hall of Fame, undo, redo, hint, peek, restart, pause, use jpg/gif/png-graphics as background, 3 difficulty levels, 6 board size from 14x6 to 30x16, several themes look-and-feel, English and German language. Req.: Java 2 runtime download from Java home. Platform independent runs using OS/2, Linux, Windows, Solaris and Mac OSX. Authors: Uwe and J
osFree is really a Free Open Source software computer development project, aiming to switch eventually all OS/2 subsystems with Open source analogues. It aims for OS/2 Warp 4 Merlin like a base compatibility system, which isn't going to mean that we're going to not support highlights of newer OS/2 Warp Server for e-business and eComStation OS/2 versions. This includes rewriting besides user-level code nevertheless the OS/2 kernel too.
Several projects sticking with the same goals exist or existed. Here will be the brief comparison of goals and tasks of various projects.
After server crash at the conclusion of 2012, the internet site is being repaired from Feb.-Mar. 2013 until recently. Now the wiki will be filled with info some of that's restored from, and areas of Forum too. So, thank you for visiting our new site!
August 28, osFree team member Vadim Priluzkiy aka Oxyd has demonstrated osFree OS/2 personality using the services of l4linux over L4 microkernel. The presentation was performed during the Chaos Constructions2011 yearly Computer Art Festival., the presentation video will be here: /watch?vyxE6Jy3SQ04
We have linked our channels osfree eCSNet and osfree EFNet. All messages a single channel are translated to a new channel. Also we reviewing our release and development position to get more effective. As always were welcom new developers in numerous areas DOS/WIN16 and OS/2 subsystems
Registration in forums at site is enbled recently. Please report forum bugs and render problems to us in site forum.
We released this preview to demonstrate actual chance of LX executables native OS/2 executable file format for being run in addition to L4. Output from LX executable is I am tiny! phrase. Other things is debug output. Our executable uses which uses So, linking also works. Also we present here osFree loader which permit to load as Multiboot compatible kernels as native OS/2 kernel. Loader is moduler and simple to extend. Next release can provide some interactive like directory browsing and files execution. See roadmap at for more information.
We replaced our old logo by new modern one. Thanks to Alexander Kramer just for this work. Also we fixed small annoying bugs within our CMS. Thanks to Kim Haverblad with the help.
Starting from now osfree channel supports rss news translation to channel. You will see any changes of project immediatly. Thanks to Yoda for bot extending.
EFNet bots osfreebot and osfree is dead. We are glad presenting new bot: osFree2. Thanks to Yoda for bot hosting.
FreePM project now component of osFree project. All source base now in osFree SVN plus some goals slightly changed like SOM interfaces as an alternative to C interfaces and binary level compatibility as opposed to source level compatibility. Most of services disabled now osFree project services musy be utilized. Thanks to Evgen Kotsuba with the help.
Make System Editor prototype compile.
RSS feeds repaired, the struggle with spambots may seem to reach the end
RSS feeds repaired, the battle with spambots may seem to reach the end
Added MSC/ICC makefiles. Changed cursor
We re now with the alpha stage, which means which the current version is just not feature-complete nor stable and never recommended for everyday usage. The 0.0.x release series will still relax in alpha stage, and 0.9 release series will probably be marked as beta, meaning a system that is suitable for daily use.
The next release is going to be 0.0.5, through an earliest projected release date being December, 2009. See our osFree roadmap for details.
Copyright c 2002-2012 The osFree Development Team and its particular Contributers.
osFree is often a Free Open Source software os development project, aiming to switch eventually all OS/2 subsystems with Open source analogues. It aims for OS/2 Warp 4 Merlin being a base compatibility system, which isn't going to mean that we shall not support options that come with newer OS/2 Warp Server for e-business and eComStation OS/2 versions. This includes rewriting not just user-level code even so the OS/2 kernel too.
We re collecting existing code for OS/2 subsystems for many years. Also we're developing each of our bootloader named FreeLdr and OS/2 personality for L4 microkernel, several servers, implementing the Control Program OS/2 kernel Interface functionality in userspace. See osFree design and development concept for more information. Visit the Chat Channel for the EFNET
Several projects concentrating on the same goals exist or existed. Here may be the brief comparison of goals and tasks of projects.
After server crash at the conclusion of 2012, the internet site is being repaired from Feb.-Mar. 2013 as yet. Now the wiki has filled with info some of that is restored from, and areas of Forum too. So, thanks for visiting our new site!
August 28, osFree team member Vadim Priluzkiy aka Oxyd has demonstrated osFree OS/2 personality cooperating with l4linux over L4 microkernel. The presentation was executed during the Chaos Constructions2011 yearly Computer Art Festival., the presentation video has arrived: /watch?vyxE6Jy3SQ04
We have linked our channels osfree eCSNet and osfree EFNet. All messages within a channel are translated to an alternative channel. Also we reviewing our release and development position to get more effective. As always we're also welcom new developers in several areas DOS/WIN16 and OS/2 subsystems
Registration in forums at site is enbled recently. Please report forum bugs and render problems to us in site forum.
We released this preview showing actual potential for LX executables native OS/2 executable file format to become run in addition to L4. Output from LX executable is I am tiny! phrase. Other things is debug output. Our executable uses which uses So, linking also works. Also we present here osFree loader which permit to load as Multiboot compatible kernels as native OS/2 kernel. Loader is moduler and simple to extend. Next release can provide some interactive like directory browsing and files execution. See roadmap at have a look at.
We replaced our old logo by new modern one. Thanks to Alexander Kramer because of this work. Also we fixed small annoying bugs inside our CMS. Thanks to Kim Haverblad for your help.
Starting from now osfree channel supports rss news translation to channel. You will see any changes of project immediatly. Thanks to Yoda for bot extending.
EFNet bots osfreebot and osfree is dead. We are glad to show new bot: osFree2. Thanks to Yoda for bot hosting.
FreePM project now section of osFree project. All source base now in osFree SVN and many goals slightly changed like SOM interfaces as opposed to C interfaces and binary level compatibility rather than source level compatibility. Most of services disabled and from now on osFree project services musy be taken. Thanks to Evgen Kotsuba for that help.
Make System Editor prototype compile.
RSS feeds repaired, your dream with spambots may seem to reach the end
RSS feeds repaired, the struggle with spambots generally seems to reach the end
Added MSC/ICC makefiles. Changed cursor
We re now with the alpha stage, which means the current version just isn't feature-complete nor stable but not recommended for everyday usage. The 0.0.x release series will still be in alpha stage, and 0.9 release series will probably be marked as beta, meaning a system that is suitable for everyday use.
The next release will probably be 0.0.5, with the earliest projected release date being December, 2009. See our osFree roadmap for details.
Except where otherwise noted, content within this wiki is licensed underneath the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
Copyright c 2002-2012 The osFree Development Team and its particular Contributers.